Aluminum Green Sand Casting
GREEN SAND CASTING PROCESS

ALUMINUM SAND CASTING

Francis Manufacturing produces green sand aluminum castings in Russia, Ohio. We work with your team to take new designs and existing parts into production, with support for tooling, alloy selection, and finishing.

FROM PATTERN TO POUR

HOW A SAND CASTING TAKES SHAPE.

Francis Manufacturing produces aluminum castings using the green sand process. We pack a mixture of sand, water, and organic compounds around a pattern. When we remove the pattern, the impression it leaves becomes the cavity that gives the casting its shape.

The mold has two halves: the cope on top and the drag on the bottom. A frame called a flask holds the sand as it’s packed and sets the overall size of the mold. If the part needs an internal passage or hollow area, we place a sand core inside before closing the mold.

Molten aluminum enters through an opening called the sprue. Runners and gates carry the metal into one or more cavities, while risers supply additional metal as the castings solidify. Once the aluminum has solidified, we separate the castings from the sand in a process called shakeout.

From there, the castings move to finishing, where we remove gates and risers and grind the parting lines smooth. Depending on the customer’s specifications, the parts may go through secondary operations before shipment.

The Making of an Aluminum Casting

Aluminum casting pattern
01
Pattern

The pattern gives the casting its shape. We work with your engineers and our pattern makers to develop tooling around your part requirements and our green sand molding process.

Aluminum casting mold
02
Mold

We pack molding sand around the pattern to form the cope and drag. When the part calls for an internal passage or hollow area, we place a sand core before closing the mold.

Aluminum casting mold pouring
03
Pour

Molten aluminum enters through the sprue and fills the mold cavity. Once the metal has solidified, we break away the sand to free the casting during shakeout.

Finished aluminum casting
04
Finish

We remove the gates and risers and grind the parting lines smooth. From there, the casting can move on to machining, heat treating, coating, or other secondary operations as specified.

No items found.

Production Capabilities

FROM SMALL ORDERS TO PRODUCTION RUNS

We typically produce runs of 1 to 10,000 castings, with parts ranging from fractions of an ounce to several hundred pounds. Share your drawing, target quantities, and any material or finishing requirements so we can review the project with you.

Aluminum Casting Examples

HAVE A PART YOU NEED CAST?

Send us your drawings, estimated quantities, and any machining or finishing requirements.